Cr 250 specs

ENGINE

Engine Type 249cc liquid-cooled single-cylinder two-stroke with electronically controlled RC valve

Bore and Stroke 66.4mm x 72.0mm

Compression Ratio 8.5:1

Induction Eight-petal crankcase reed-valve

Carburetion 38mm Mikuni TMX flat-slide

Ignition CDI with three-dimensional mapping and electronic advance

DRIVE TRAIN

Transmission Close-ratio five-speed

Final Drive #520 chain; 13T/48T

CHASSIS / SUSPENSION / BRAKES

Front Suspension 47mm inverted Showa cartridge fork with 16-position rebound- and 16-position compression-damping adjustability; 12.4-inch travel

Rear Suspension Pro-Link Showa single shock with spring-preload, 17-position rebound-damping adjustability, and compression-damping adjustment separated into low-speed (13 positions) and high-speed (3.5 turns); 12.6-inch travel

Front Brake Single 240mm disc with twin-piston caliper

Rear Brake Single 240mm disc

Front Tire 80/100-21

Rear Tire 110/90-19

DIMENSIONS

Rake 26.42 degrees

Trail 106.7mm (4.2 inches)

Wheelbase 58.7 inches

Seat Height 37.4 inches

Ground Clearance 13.6 inches

Dry Weight 213.0 pounds

Fuel Capacity 2.0 gallons

OTHER

Available Colors Red

Model ID CR250R